Skip to content
HaulMate
  • Furniture delivery
  • Packing
  • Checklist

How to Protect Furniture During Transport: A Practical Checklist

Most furniture damage happens in the truck, not in the store. Use this checklist to wrap, load and strap your items so they arrive in the same shape they left.

By HaulMate Team3 min read

Two people wrapping a chair in bubble wrap on a wooden floor

Scratches, dents and torn upholstery usually come from items shifting, rubbing or getting wet on the way, not from one big accident. The good news is that most of it is preventable with a few cheap supplies and ten minutes of care.

What you need

  • Moving blankets or old duvets
  • Stretch wrap or plastic wrap
  • Bubble wrap or corner protectors for fragile edges
  • Ratchet straps or strong rope (not elastic bungee cords)
  • Cardboard or foam sheets for flat surfaces such as table tops and mirrors
  • Painter's tape and a marker
  • A screwdriver or Allen key, and small bags for screws

Step 1: Prepare the piece

  1. Empty it. Remove everything from drawers, shelves and cupboards. Loose items shift and add weight.
  2. Take it apart where you can. Remove legs, shelves, cushions and doors if they come off easily. Put screws and fittings in a labelled bag and tape it to the item.
  3. Secure what cannot be removed. Tape drawers and doors shut with painter's tape. It does not damage most finishes.
  4. Clean and photograph it. A quick photo of each side is useful if there is a dispute later.

Step 2: Wrap it

  • Cover the whole piece in a moving blanket and hold it in place with stretch wrap. Do not put stretch wrap directly on wood or leather, because it can mark the finish.
  • Protect corners and edges with extra padding. Corners are where most dents happen.
  • Wrap glass and mirrors separately and mark them clearly.
  • For upholstered items such as sofas, a plastic cover over the blanket keeps out dirt and rain.

Step 3: Load in the right order

The order inside the truck matters as much as the wrapping.

  1. Heavy and sturdy items go first, against the front wall of the cargo area.
  2. Large flat items such as mattresses and mirrors stand on their long edge, against a wall, and are strapped in.
  3. Lighter items go on top, never under heavy ones.
  4. Fill the gaps with cushions or blankets so nothing has room to slide.

Step 4: Strap it down

A load that cannot move is a load that cannot get damaged.

  • Run straps across the load and tension them so the items sit firmly without being crushed.
  • Use more than one strap on larger pieces.
  • In an open pickup bed, add a cover or tarp, and secure it so it does not flap against the furniture.
  • Check the straps again after the first few minutes of driving. Loads settle.

Step 5: Unload with care

  • Take items off in reverse order and set them on a clean surface.
  • Unwrap inside, so debris and dirt stay outside.
  • Look the piece over and compare it to your photos while the driver is still there.

If someone else is doing the hauling

When you hire a driver, agree on who wraps and who straps before the day. Experienced drivers bring their own blankets and straps, but you can reduce the risk by having the item emptied, disassembled and ready. If you are choosing between drivers, see our driver checklist.

With HaulMate, drivers add a photo when they pick up your items and another when they drop them off, which gives both sides a clear record of the condition.

Quick checklist

  • Emptied and disassembled
  • Photographed from every side
  • Wrapped with blankets, corners padded
  • Loaded heavy first, no gaps
  • Strapped tight and covered
  • Checked on arrival

Spend ten minutes protecting the furniture, and it will arrive ready to use.

Get your stuff home.

Download HaulMate free on iPhone and Android. Your first delivery is a few taps away.