- Furniture delivery
- Dining room
- Guides
How to Move a Dining Table and Chairs Safely
Dining sets are made of long legs, glass tops and fragile joints. Follow these steps to take apart, wrap and load a table and chairs so every piece arrives in one piece.
By HaulMate Team2 min read

A dining table and chairs look simple, but they have a lot of fragile parts: long legs, polished tops, glass panels and chair joints that loosen with knocks. Moving them well is mostly about disassembly and padding.
Measure first
Measure the table top and the chairs, then check them against doorways, stairs and the truck. A table that cannot be taken apart may not fit through a narrow entrance, so check this before the day.
Take the table apart
- Remove the legs. Most tables use bolts, screws or brackets. Keep the hardware in a labelled bag and tape the bag to the underside of the table top.
- Remove leaves and extensions. Move them separately and wrap each one.
- Take glass tops off if they lift away, and wrap them as described below.
- Take a photo of how the parts fit together, so putting it back is easy.
Wrap the pieces
- Table top: cover with a moving blanket and tape it in place. Add corner protectors, because corners are what get hit.
- Legs: wrap in blankets or bubble wrap, and bundle them together.
- Glass: use cardboard on both sides, bubble wrap around the edges, and mark it clearly. Store it upright, never flat under a load.
- Chairs: wrap the legs and the backs, and tape the arms. Stack chairs seat to seat only if there is padding between them.
Loading the truck
- Put the table top in first, standing on its long edge against a wall and strapped in. A large flat top lying down can be crushed by anything on it.
- Load the legs and hardware where they cannot slide.
- Place the chairs on top or beside, so that the legs are not carrying weight.
- Strap everything down and fill gaps with blankets.
Our furniture protection checklist goes into more detail on loading and strapping.
At the other end
- Carry the pieces in before you unwrap, so the dirt stays outside.
- Reassemble on a soft surface, such as a blanket or a rug, to protect the top.
- Check that every bolt is tight, and that the table does not wobble.
- Check the chairs for loose joints and tighten them.
When to hire help
Heavy solid wood tables and large glass tops are better as two-person jobs, or for an experienced driver. If you are comparing options, see our guide to renting a truck or hiring a local driver.
HaulMate lets you attach a photo and describe the access, so the driver knows what to expect and what truck to bring.


